### Transfer Functions

You may have heard of gamma, a power function that corrects for non-linear response in CRT displays and was introduced back when television was in its infancy. Transfer Function is a more accurate term to describe gamma, as a strict power function is only one method of creating the function's curve. Other methods use a linear section at the bottom of the curve. The main difference between the major transfer functions supported by HiRes are the slope of the linear portion, the transition point ("knee") to a power function, and the exponent of the power function. HiRes supports three widely used transfer functions in addition to the simple power function.
To the left are the curves of the functions that are used for converting from linear intensity values. These functions are well documented on the web, particularly at wikipedia.

sRGB is the default transfer function for all still images.

SMPTE 170M is the same function used in ITU 709, and the default for mpeg video.

As can be seen, sRGB closely follows the power function of 2.2, while the two SMPTE functions are very similar.
Encoding Decoding The general formula for transfer functions is: V = S * Lc for LC < Ke Lc = V / S for V < Kd V = (1 + A) * Lcp - A Lc = ((V + A) / (1 + A))1/p
symbolmeaningsRGBSMPTE 170M
ITU 709
SMPTE 240M
Sslope of linear portion12.92
4.5
4.5
Keencoding knee0.00304
0.0180
0.0228
Kddecoding knee0.03928
0.0812
0.0912
Aoffset0.055
0.099
0.1115
ppower1/2.4
0.45
0.45
Also note that S = Kd / Ke Carbon home Copyright © 2005 - 2014 MPUCoder, all rights reserved. MuxMan home